IntraCon IA-RE19
- 2 main inputs: universal (temperature and standard signals)
- 2 logic inputs
- Additional input and RS485 (optional)
- 4 outputs (control and alarm): relay, transistor or continuous (optional)
- Control: PID with auto-tuning, on/off
- Programmable control (15 programs of 15 intervals) (optional)
- Step-by-step control (optional)
IntraCon IA-RE22
- Universal input for RTD and TC sensors or standard signals from transducers
- Relay output or binary 0/5 V for relay of SSR type
- Soft-Start-function
- Manual operating option
- Control: PID with auto-tuning, on/off
IntraCon IA-RE55
- Temperature input (thermocouple or resistance thermometer)
- Control output: relay or transistor
- Alarm output: relay (optional)
- Control: PID with auto-tuning, on/off
- Setting of the set point value by means of the knob
- Programming push-buttons (optional)
IntraCon IA-RE60
- Temperature controller to be mounted on a 35 mm rail
- The RE60 controller controls the temperature in objects through turning on and off the electrical controlling device according to the defined setting by the controller. It cooperates directly with RTDand TC
IntraCon IA-RE71
- Control acc. to the PID or ON/OFF algorithm
- Direct cooperation with resistance thermometers or thermocouple sensors
- Automatic selection of PID parameters
- One control output, relay output or voltage output for SSR relay control
- Manual control mode
IntraCon IA-RE72
- Universal measuring input
- Binary input control
- Set point value: fixed value, programmed or from an additional input
- On/Off, PID, PID step-by-step control (valve control) or PID of heating-cooling type
- Soft start
- 8 types of alarms
- Function of bistable alarm (LATCH)
- Timer function
- Measurement of heater current and heater burning or short-circuit of the control element
IntraCon IA-RE81
- Control acc. to the PID or ON/OFF, heating/cooling algorithms or step-by-step control
- Direct cooperation with resistance thermometers (RTD) or thermocouple sensors (TC)
- Automatic selection of PID parameters
- 2 configurable outputs
- Controller configuration by means of the free delivered LPConfig program
- Error signalling by means of messages
- Manual control mode
- Frontal protection grade ensured by the casing: IP65
IntraCon IA-RE82
- Universal measuring input
- Binary input control
- Set point value: fixed value, programmed or from an additional input
- On/Off, PID, PID step-by-step control (valve control) or PID of heating-cooling type
- Soft start
- 8 types of alarms
- Function of bistable alarm (LATCH)
- Timer function
- Measurement of heater current and heater burning or short-circuit of the control element