Products > IntraCon

  • IntraCon IA-RE19

    • 2 main inputs: universal (temperature and standard signals)
    • 2 logic inputs
    • Additional input and RS485 (optional)
    • 4 outputs (control and alarm): relay, transistor or continuous (optional)
    • Control: PID with auto-tuning, on/off
    • Programmable control (15 programs of 15 intervals) (optional)
    • Step-by-step control (optional)

  • IntraCon IA-RE22

    • Universal input for RTD and TC sensors or standard signals from transducers
    • Relay output or binary 0/5 V for relay of SSR type
    • Soft-Start-function
    • Manual operating option
    • Control: PID with auto-tuning, on/off


  • IntraCon IA-RE55

    • Temperature input (thermocouple or resistance thermometer)
    • Control output: relay or transistor
    • Alarm output: relay (optional)
    • Control: PID with auto-tuning, on/off
    • Setting of the set point value by means of the knob
    • Programming push-buttons (optional)

  • IntraCon IA-RE60

    • Temperature controller to be mounted on a 35 mm rail
    • The RE60 controller controls the temperature in objects through turning on and off the electrical controlling device according to the defined setting by the controller. It cooperates directly with RTDand TC


  • IntraCon IA-RE71

    • Control acc. to the PID or ON/OFF algorithm
    • Direct cooperation with resistance thermometers or thermocouple sensors
    • Automatic selection of PID parameters
    • One control output, relay output or voltage output for SSR relay control
    • Manual control mode

  • IntraCon IA-RE72

    • Universal measuring input
    • Binary input control
    • Set point value: fixed value, programmed or from an additional input
    • On/Off, PID, PID step-by-step control (valve control) or PID of heating-cooling type
    • Soft start
    • 8 types of alarms
    • Function of bistable alarm (LATCH)
    • Timer function
    • Measurement of heater current and heater burning or short-circuit of the control element


  • IntraCon IA-RE81

    • Control acc. to the PID or ON/OFF, heating/cooling algorithms or step-by-step control
    • Direct cooperation with resistance thermometers (RTD) or thermocouple sensors (TC)
    • Automatic selection of PID parameters
    • 2 configurable outputs
    • Controller configuration by means of the free delivered LPConfig program
    • Error signalling by means of messages
    • Manual control mode
    • Frontal protection grade ensured by the casing: IP65

  • IntraCon IA-RE82

    • Universal measuring input
    • Binary input control
    • Set point value: fixed value, programmed or from an additional input
    • On/Off, PID, PID step-by-step control (valve control) or PID of heating-cooling type
    • Soft start
    • 8 types of alarms
    • Function of bistable alarm (LATCH)
    • Timer function
    • Measurement of heater current and heater burning or short-circuit of the control element



  • Voltar..,0.back,0
  • 1. Instrumentos de vazão
    • Voltar..,1.back,0
    • 1.1. Tubo Pitot ITABAR
      • Voltar..,1.1.back,0
      • 1.1.1. Vazão de Vapor
        • Voltar..,1.1.1.back,0
        • 1.1.1.1. ITABAR IBRD
        • 1.1.1.2. ITABAR IBFD
        • 1.1.1.3. ITABAR IBFD HT
        • 1.1.1.4. ITABAR IBFD HTG
        • 1.1.1.5. ITABAR FTMD
        • 1.1.1.6. ITABAR FTHD
      • 1.1.2. Vazão de Líquidos e Gases
        • Voltar..,1.1.2.back,0
        • 1.1.2.1. ITABAR IBR
        • 1.1.2.2. ITABAR IBF
        • 1.1.2.3. ITABAR IBF-100
        • 1.1.2.4. ITABAR FTN
        • 1.1.2.5. ITABAR FTM
        • 1.1.2.6. ITABAR FTH
    • 1.2. Linha Ultrassônica,,1
      • Voltar..,1.2.back,0
      • 1.2.1. IS210-P Medidor de Vazão Portátil
        • Voltar..,1.2.1.back,0
      • 1.2.2. IS210-S Medidor de Vazão Portátil,,1
        • Voltar..,1.2.2.back,0
      • 1.2.3. IS210-H Handheld
        • Voltar..,1.2.3.back,0
    • 1.3. Placas de Orifício
      • Voltar..,1.3.back,0
      • 1.3.5. Flanges para montagem de placa de orifício SOF
        • Voltar..,1.3.5.back,0
      • 1.3.6. Orifício Integral
        • Voltar..,1.3.6.back,0
    • 1.4. Tubos Venturi
      • Voltar..,1.4.back,0
    • 1.5. Bocais
      • Voltar..,1.5.back,0
    • 1.6. Visores de fluxo
      • Voltar..,1.6.back,0
      • 1.6.1. Visor de Fluxo tipo palheta
        • Voltar..,1.6.1.back,0
    • 1.7. Cone Flow Meter
      • Voltar..,1.7.back,0
    • 1.8. Elemento Cunha (Wedge)
      • Voltar..,1.8.back,0
  • 2. Instrumentos de nível
    • Voltar..,2.back,0
    • 2.1. ITA Indicador Magnético de Nível
      • Voltar..,2.1.back,0
      • 2.1.1. Montagem lateral
        • Voltar..,2.1.1.back,0
        • 2.1.1.1. Indicadores de Nível Standard
        • 2.1.1.2. Indicadores Magnéticos para líquidos criogênicos
        • 2.1.1.3. Indicadores de Nível com revestimento
        • 2.1.1.4. Indicadores de Nível em Plástico
      • 2.1.2. Montagem em topo
        • Voltar..,2.1.2.back,0
      • 2.1.3. Montagem em fundo
        • Voltar..,2.1.3.back,0
    • 2.2. Transmissor de Nível de Tanque/Contatos,,1
      • Voltar..,2.2.back,0
      • 2.2.1. Indicador de Nível T1S
        • Voltar..,2.2.1.back,0
      • 2.2.2. Indicador de Nível T1R
        • Voltar..,2.2.2.back,0
    • 2.3. Indicador Magnético de Nível de Tanque Maglink
      • Voltar..,2.3.back,0
    • 2.4. Indicadores de Nível Transparentes
      • Voltar..,2.4.back,0
    • 2.5. Indicador de Nível Tipo Tubular
      • Voltar..,2.5.back,0
    • 2.6. Indicador de Nível Reflex
      • Voltar..,2.6.back,0
    • 2.7. Indicador de Nível Reflex com aquecimento/resfriamento integrado
      • Voltar..,2.7.back,0
    • 2.8. Indicador de Nível com Iluminação
      • Voltar..,2.8.back,0
    • 2.9. Indicadores de Nível Bicolores
      • Voltar..,2.9.back,0
    • 2.10. Indicador de Nível de Água de Caldeira
      • Voltar..,2.10.back,0
    • 2.12. Transmissor para Nível de Líquidos Interface e Densidade
      • Voltar..,2.12.back,0
      • 2.12.1. 144 FP
        • Voltar..,2.12.1.back,0
      • 2.12.2. 144 LD
        • Voltar..,2.12.2.back,0
      • 2.12.3. 167 LP
        • Voltar..,2.12.3.back,0
      • 2.12.4. 244 LD
        • Voltar..,2.12.4.back,0
      • 2.12.5. 244 LVP
        • Voltar..,2.12.5.back,0
      • 2.12.6. 104 XX
        • Voltar..,2.12.6.back,0
    • 2.13. Float and Displacer Level Switches
      • Voltar..,2.13.back,0
  • 3. Componentes de sistema,'',1
    • Voltar..,3.back,0
    • 3.1. Unidade de Purga
      • Voltar..,3.1.back,0
      • 3.1.1. Unidade de Purga
        • Voltar..,3.1.1.back,0
    • 3.2. Computadores de Vazão/Displays,,1
      • Voltar..,3.2.back,0
      • 3.2.1. DigiFlow
        • Voltar..,3.2.1.back,0
        • 3.2.1.1. DigiFlow 505
        • 3.2.1.2. DigiFlow 515
        • 3.2.1.3. DigiFlow 516
      • 3.2.2. IntraDigit
        • Voltar..,3.2.2.back,0
        • 3.2.2.1. IntraDigit IA-N20
        • 3.2.2.2. IntraDigit IA-N20z
        • 3.2.2.3. IntraDigit IA-N24
        • 3.2.2.4. IntraDigit IA-N25
        • 3.2.2.5. IntraDigit IA-N30h
        • 3.2.2.6. IntraDigit IA-N30o
        • 3.2.2.7. IntraDigit IA-N30p
        • 3.2.2.8. IntraDigit IA-N30u
      • 3.2.3. IntraGraph
        • Voltar..,3.2.3.back,0
        • 3.2.3.1. IntraGraph IA-NA3
        • 3.2.3.2. IntraGraph IA-NA5
        • 3.2.3.3. IntraGraph IA-NA6
      • 3.2.4. IntraCon,,1
        • Voltar..,3.2.4.back,0
        • 3.2.4.1. IntraCon IA-RE19
        • 3.2.4.2. IntraCon IA-RE22
        • 3.2.4.3. IntraCon IA-RE55
        • 3.2.4.4. IntraCon IA-RE60
        • 3.2.4.5. IntraCon IA-RE71
        • 3.2.4.6. IntraCon IA-RE72
        • 3.2.4.7. IntraCon IA-RE81
        • 3.2.4.8. IntraCon IA-RE82
    • 3.6. Acessórios
      • Voltar..,3.6.back,0
    • 3.7. Transmissor para Cabeçote
      • Voltar..,3.7.back,0
      • 3.7.1. Transmissor para Cabeçote
        • Voltar..,3.7.1.back,0
    • 3.8. Calibration pots for pumps
      • Voltar..,3.8.back,0
      • 3.8.1. Calibration pots for pumps
        • Voltar..,3.8.1.back,0