Products > IntraCon

  • IntraCon IA-RE19

    • 2 main inputs: universal (temperature and standard signals)
    • 2 logic inputs
    • Additional input and RS485 (optional)
    • 4 outputs (control and alarm): relay, transistor or continuous (optional)
    • Control: PID with auto-tuning, on/off
    • Programmable control (15 programs of 15 intervals) (optional)
    • Step-by-step control (optional)

  • IntraCon IA-RE22

    • Universal input for RTD and TC sensors or standard signals from transducers
    • Relay output or binary 0/5 V for relay of SSR type
    • Soft-Start-function
    • Manual operating option
    • Control: PID with auto-tuning, on/off


  • IntraCon IA-RE55

    • Temperature input (thermocouple or resistance thermometer)
    • Control output: relay or transistor
    • Alarm output: relay (optional)
    • Control: PID with auto-tuning, on/off
    • Setting of the set point value by means of the knob
    • Programming push-buttons (optional)

  • IntraCon IA-RE60

    • Temperature controller to be mounted on a 35 mm rail
    • The RE60 controller controls the temperature in objects through turning on and off the electrical controlling device according to the defined setting by the controller. It cooperates directly with RTDand TC


  • IntraCon IA-RE71

    • Control acc. to the PID or ON/OFF algorithm
    • Direct cooperation with resistance thermometers or thermocouple sensors
    • Automatic selection of PID parameters
    • One control output, relay output or voltage output for SSR relay control
    • Manual control mode

  • IntraCon IA-RE72

    • Universal measuring input
    • Binary input control
    • Set point value: fixed value, programmed or from an additional input
    • On/Off, PID, PID step-by-step control (valve control) or PID of heating-cooling type
    • Soft start
    • 8 types of alarms
    • Function of bistable alarm (LATCH)
    • Timer function
    • Measurement of heater current and heater burning or short-circuit of the control element


  • IntraCon IA-RE81

    • Control acc. to the PID or ON/OFF, heating/cooling algorithms or step-by-step control
    • Direct cooperation with resistance thermometers (RTD) or thermocouple sensors (TC)
    • Automatic selection of PID parameters
    • 2 configurable outputs
    • Controller configuration by means of the free delivered LPConfig program
    • Error signalling by means of messages
    • Manual control mode
    • Frontal protection grade ensured by the casing: IP65

  • IntraCon IA-RE82

    • Universal measuring input
    • Binary input control
    • Set point value: fixed value, programmed or from an additional input
    • On/Off, PID, PID step-by-step control (valve control) or PID of heating-cooling type
    • Soft start
    • 8 types of alarms
    • Function of bistable alarm (LATCH)
    • Timer function
    • Measurement of heater current and heater burning or short-circuit of the control element



  • Back..,0.back,0
  • 1. Flow instruments
    • Back..,1.back,0
    • 1.1. ITABAR Pitot Tube
      • Back..,1.1.back,0
      • 1.1.1. Steam Flow
        • Back..,1.1.1.back,0
        • 1.1.1.1. ITABAR IBRD
        • 1.1.1.2. ITABAR IBFD
        • 1.1.1.3. ITABAR IBFD HT
        • 1.1.1.4. ITABAR IBFD HTG
        • 1.1.1.5. ITABAR FTMD
        • 1.1.1.6. ITABAR FTHD
      • 1.1.2. Liquid and Gas Flow
        • Back..,1.1.2.back,0
        • 1.1.2.1. ITABAR IBR
        • 1.1.2.2. ITABAR IBF
        • 1.1.2.3. ITABAR IBF-100
        • 1.1.2.4. ITABAR FTN
        • 1.1.2.5. ITABAR FTM
        • 1.1.2.6. ITABAR FTH
    • 1.2. Ultrasonic Series,,1
      • Back..,1.2.back,0
      • 1.2.1. IS210-P Portable flowmeter
        • Back..,1.2.1.back,0
      • 1.2.2. IS210-S Stationary flowmeter,,1
        • Back..,1.2.2.back,0
      • 1.2.3. IS210-H Handheld
        • Back..,1.2.3.back,0
    • 1.3. Orifice Assemblies
      • Back..,1.3.back,0
      • 1.3.5. Orifice Flange Assemblies SOF
        • Back..,1.3.5.back,0
      • 1.3.6. Integral Orifice
        • Back..,1.3.6.back,0
    • 1.4. Venturi Tubes
      • Back..,1.4.back,0
    • 1.5. Flow Nozzles
      • Back..,1.5.back,0
    • 1.6. Sight Glasses
      • Back..,1.6.back,0
      • 1.6.1. Flapper Sight Glass
        • Back..,1.6.1.back,0
    • 1.7. Cone Flowmeter
      • Back..,1.7.back,0
    • 1.8. Wedge tube
      • Back..,1.8.back,0
  • 2. Level instruments
    • Back..,2.back,0
    • 2.1. ITA Magnetic Level Gauge
      • Back..,2.1.back,0
      • 2.1.1. Side mounted
        • Back..,2.1.1.back,0
        • 2.1.1.1. Standard Level Gauges
        • 2.1.1.2. Level Gauges for Cold Media
        • 2.1.1.3. Coated Level Gauges
        • 2.1.1.4. Plastic Level Gauges
      • 2.1.2. Top mounted
        • Back..,2.1.2.back,0
      • 2.1.3. Bottom mounted
        • Back..,2.1.3.back,0
    • 2.2. Tank Level Transmitter / Switch,,1
      • Back..,2.2.back,0
      • 2.2.1. Level Gauge T1S
        • Back..,2.2.1.back,0
      • 2.2.2. Level Gauge T1R
        • Back..,2.2.2.back,0
    • 2.3. Maglink Magnetic Tank Gauge
      • Back..,2.3.back,0
    • 2.4. Transparent Level Gauges
      • Back..,2.4.back,0
    • 2.5. Tubular Type Level Gauge
      • Back..,2.5.back,0
    • 2.6. Reflex Level Gauge
      • Back..,2.6.back,0
    • 2.7. Reflex gauge with integrated Heating/Cooling
      • Back..,2.7.back,0
    • 2.8. Illuminator Type Level Gauge
      • Back..,2.8.back,0
    • 2.9. Bicolor Level Gauges
      • Back..,2.9.back,0
    • 2.10. Boiler Steam Water Level Gauge
      • Back..,2.10.back,0
    • 2.12. Transmitter for Liquid Level Interface and Density
      • Back..,2.12.back,0
      • 2.12.1. 144 FP
        • Back..,2.12.1.back,0
      • 2.12.2. 144 LD
        • Back..,2.12.2.back,0
      • 2.12.3. 167 LP
        • Back..,2.12.3.back,0
      • 2.12.4. 244 LD
        • Back..,2.12.4.back,0
      • 2.12.5. 244 LVP
        • Back..,2.12.5.back,0
      • 2.12.6. 104 XX
        • Back..,2.12.6.back,0
    • 2.13. Float and Displacer Level Switches
      • Back..,2.13.back,0
  • 3. System components,'',1
    • Back..,3.back,0
    • 3.1. Purge Unit
      • Back..,3.1.back,0
      • 3.1.1. Purge Unit
        • Back..,3.1.1.back,0
    • 3.2. Flow Computers / Displays,,1
      • Back..,3.2.back,0
      • 3.2.1. DigiFlow
        • Back..,3.2.1.back,0
        • 3.2.1.1. DigiFlow 505
        • 3.2.1.2. DigiFlow 515
        • 3.2.1.3. DigiFlow 516
      • 3.2.2. IntraDigit
        • Back..,3.2.2.back,0
        • 3.2.2.1. IntraDigit IA-N20
        • 3.2.2.2. IntraDigit IA-N20z
        • 3.2.2.3. IntraDigit IA-N24
        • 3.2.2.4. IntraDigit IA-N25
        • 3.2.2.5. IntraDigit IA-N30h
        • 3.2.2.6. IntraDigit IA-N30o
        • 3.2.2.7. IntraDigit IA-N30p
        • 3.2.2.8. IntraDigit IA-N30u
      • 3.2.3. IntraGraph
        • Back..,3.2.3.back,0
        • 3.2.3.1. IntraGraph IA-NA3
        • 3.2.3.2. IntraGraph IA-NA5
        • 3.2.3.3. IntraGraph IA-NA6
      • 3.2.4. IntraCon,,1
        • Back..,3.2.4.back,0
        • 3.2.4.1. IntraCon IA-RE19
        • 3.2.4.2. IntraCon IA-RE22
        • 3.2.4.3. IntraCon IA-RE55
        • 3.2.4.4. IntraCon IA-RE60
        • 3.2.4.5. IntraCon IA-RE71
        • 3.2.4.6. IntraCon IA-RE72
        • 3.2.4.7. IntraCon IA-RE81
        • 3.2.4.8. IntraCon IA-RE82
    • 3.6. Accessories
      • Back..,3.6.back,0
    • 3.7. Head Transmitter
      • Back..,3.7.back,0
      • 3.7.1. Head Transmitter
        • Back..,3.7.1.back,0
    • 3.8. Calibration pots for pumps
      • Back..,3.8.back,0
      • 3.8.1. Calibration pots for pumps
        • Back..,3.8.1.back,0