Products > Orifice Assemblies

  • Orifice Plate SOP

    Orifice Plate SOPSuitable for universal flow conditions
    Low cost & high reliability.

  • Orifice Plate with ring SOR

    Orifice Plate with ring SORUsed for flow measurement of small and medium sized pipes
    For low pressure only.


  • Orifice plate with integral block SOB

    Orifice plate with integral block SOBUsed for high pressure and high temperature
    This type is easily removable and interchangeable
    Calibrated bore with burr free sharp edge.

  • Ring joint type orifice plate SOJ

    Ring joint type orifice plate SOJThis Orifice plate is easily removable and interchangeable
    The calibrated bore with it burr free sharp edge is suitable for a fluid with high pressure & high temperature.


  • Orifice Flange Assemblies SOF

    Orifice Flange Assemblies SOFUsed in conjunction with orifice plates
    Suitable for almost all fluid conditions on primary differential devices.
    Technical information  (2MB) 

  • Integral Orifice

    Integral OrificeIn combination with differential pressure transmitter Integral Orifices are suitable for measuring fluid of small bore and were high accuracy is needed.

    Integrated flowmeter eliminates the need for fittings, tubing, valves, adapters, and mounting brackets, thereby reducing welding and installation time.
    Technical information  (2MB) 



  • Back..,0.back,0
  • 1. Flow instruments,'',1
    • Back..,1.back,0
    • 1.1. ITABAR Pitot Tube
      • Back..,1.1.back,0
      • 1.1.1. Steam Flow
      • 1.1.2. Liquid and Gas Flow
    • 1.2. Ultrasonic Series
      • Back..,1.2.back,0
      • 1.2.1. IS210-P Portable flowmeter
      • 1.2.2. IS210-S Stationary flowmeter
      • 1.2.3. IS210-H Handheld
    • 1.3. Orifice Assemblies,,1
      • Back..,1.3.back,0
      • 1.3.5. Orifice Flange Assemblies SOF
      • 1.3.6. Integral Orifice
    • 1.4. Venturi Tubes
      • Back..,1.4.back,0
    • 1.5. Flow Nozzles
      • Back..,1.5.back,0
    • 1.6. Sight Glasses
      • Back..,1.6.back,0
      • 1.6.1. Flapper Sight Glass
    • 1.7. Cone Flowmeter
      • Back..,1.7.back,0
    • 1.8. Wedge tube
      • Back..,1.8.back,0
  • 2. Level instruments
    • Back..,2.back,0
    • 2.1. ITA Magnetic Level Gauge
      • Back..,2.1.back,0
      • 2.1.1. Side mounted
      • 2.1.2. Top mounted
      • 2.1.3. Bottom mounted
    • 2.2. Tank Level Transmitter / Switch
      • Back..,2.2.back,0
      • 2.2.1. Level Gauge T1S
      • 2.2.2. Level Gauge T1R
    • 2.3. Maglink Magnetic Tank Gauge,,1
      • Back..,2.3.back,0
    • 2.4. Transparent Level Gauges
      • Back..,2.4.back,0
    • 2.5. Tubular Type Level Gauge
      • Back..,2.5.back,0
    • 2.6. Reflex Level Gauge
      • Back..,2.6.back,0
    • 2.7. Reflex gauge with integrated Heating/Cooling
      • Back..,2.7.back,0
    • 2.8. Illuminator Type Level Gauge
      • Back..,2.8.back,0
    • 2.9. Bicolor Level Gauges
      • Back..,2.9.back,0
    • 2.10. Boiler Steam Water Level Gauge
      • Back..,2.10.back,0
    • 2.12. Transmitter for Liquid Level Interface and Density
      • Back..,2.12.back,0
      • 2.12.1. 144 FP
      • 2.12.2. 144 LD
      • 2.12.3. 167 LP
      • 2.12.4. 244 LD
      • 2.12.5. 244 LVP
      • 2.12.6. 104 XX
    • 2.13. Float and Displacer Level Switches
      • Back..,2.13.back,0
  • 3. System components
    • Back..,3.back,0
    • 3.1. Purge Unit
      • Back..,3.1.back,0
      • 3.1.1. Purge Unit
    • 3.2. Flow Computers / Displays
      • Back..,3.2.back,0
      • 3.2.1. DigiFlow
      • 3.2.2. IntraDigit
      • 3.2.3. IntraGraph
      • 3.2.4. IntraCon
    • 3.6. Accessories
      • Back..,3.6.back,0
    • 3.7. Head Transmitter
      • Back..,3.7.back,0
      • 3.7.1. Head Transmitter
    • 3.8. Calibration pots for pumps
      • Back..,3.8.back,0
      • 3.8.1. Calibration pots for pumps